The Impulse 7000DP model is a combination Defibrillator/Transcutaneous Pacemaker Analyzer with an intuitive user interface, backlight, and easy-to-read display. This portable, rugged, easy-to-carry device features functionality that includes energy output measurement, ECG waves, and an extensive range of test loads and measurement algorithms needed to test external transcutaneous pacemakers. The Impulse 7000DP coupled with the Impulse 7010 Defibrillator Selectable Load Accessory enables end-users to select from multiple loads (25Ω - 200Ω) ensuring IEC 60601-2-4 compliance.

The Impulse 7000DP features 10 independent ECG outputs that provide 12 lead combinations for standardized clinical signals. Ansur test automation may be purchased in order to standardize test procedures, capture waveforms and test results, and evolve with increasing requirements for electronic data storage.

- IEC 60601-2-4 Compliance
- Lown, Edmark, trapezoidal, biphasic and pulsed-biphasic defibrillation technology compatibility
- AED compatibility
- 12-lead ECG simulation
- Ability to test external transcutaneous pacemakers (Impulse 7000 DP only)
- Internal pacer brand selections
- Flexible heart-rate settings (1BPM step)
- DSP-based measurements for firmware and waveform upgrade
- Waveform capture, store and replay
- First-in-class accuracy ± 1% of reading + 0.1J
- Long lasting, rechargeable battery

- Temperature, Operating : 10 °C to 40 °C (50 °F to 104 °F)
- Temperature, Storage : -20 °C to +60 °C (-4 °F to +140 °F)
- Humidity : 10 % to 90 % non-condensing
- Display : LCD display
- Communications : USB device port for computer control
- Modes of Operation : Manual and remote
- Power : Internal rechargeable NiMH battery pack for nine hours (typical) operation after full charge or the battery charger can operate the analyzer and charge the battery simultaneously
- Battery Charger : 100 V to 240 V input, 15 V/1.5 V A output. For best performance, the battery charger should be connected to a properly grounded ac receptacle
- Enclosure : ABS plastic housing
- Dimensions : 32 cm x 24 cm x 13 cm (13 in x 9.5 in x 5 in)
- Weight : 3.02 kg (6.6 lb, 0.1 oz)
- Safety Standards : CE: IEC/EN61010-1 2nd Edition; Pollution degree 2 CAN/CSA-C22.2 No. 61010-1; UL61010-1 C-Tick: Australian EMC

Package includes:
- USB Computer Communication Cable (Cable assembly)
- User Manual CD (CD-ROM)
- Getting Started Guide (Manual)
- Battery Eliminator (country specific)
- Defib Paddle Contact Plates (FBC-IMP7000-8010)
- Carrying Case (Soft case)

Write a review

Note: HTML is not translated!
    Bad           Good

Fluke Impulse 7000DP Defibrillator Analyzer

  • Brand: Fluke
  • Product Code: 7000DP
  • Availability: In Stock
  • $4,300.00
  • $3,910.00

  • Ex Tax: $3,910.00

Tags: Diagnostic, Defibrillator, Medical Equipment, Fluke